SHOP MOG PARTS
Download instructions from the below links.
Boost Gauge Programing Instruction Click Here
This pressure sensor is for diesel engine boost pressure measurements from -0.33 to 3.30 bar (or -5.0 to 48.0 PSI). Unlike most digital boost gauges on the market , this sensor measures relative pressure (or gauge pressure) instead of absolute pressure. When not pressurized, the sensor will always give a zero pressure signal regardless of the elevation where the vehicle is at. It behaves the same way as the mechanical boost gauge.
When connected, the sensor will give you 0.01 bar or 0.1PSI resolution.
The sensor is supplied with a mating connector and 2 m (6ft) cable.
General Specifications:
Electrical:
Supply Voltage | 5.0±0.5 VDC |
Supply Current | 10 mA max |
Maximum Output Current Sink | 1 mA |
Source | 0.1 mA |
Output Impedance | 10 ohms max |
Output Type | ratiometric |
Output Voltage | 0.1 to 4.85 VDC at 5VDC excitation |
Sensor Operating Characteristics:
Range (relative pressure, or gauge pressure) | -0.3 bar to 3.3 bar (-5.0 psi to 48 psi) |
Proof Pressure | 200%FS |
Static Accuracy for -40 ~ 0 °C | 3% FS |
Static Accuracy for 0 ~ 80 °C | 1% FS |
Static Accuracy for 80 ~ 135 °C, | 3% FS |
.
Environmental Effects:
Compensated Temperature Range | -40°C to 135°C |
Storage Temperature Range | -50°C to 165°C |
Mechanical:
Barb fitting OD: 0.25 inch; ID:0.11 inch
Compatibility Media: Air.
Notes: Static accuracy is the RSS of non-linearity, hysteresis, and non-repeatability
Additional information
Weight | .25 kg |
---|---|
Dimensions | 15 × 10 × 10 cm |